VeEX MPA User Manual page 209

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
ODUflex Mapping
ODU-j Dropped
Note: The ODU-j
Dropped function is
available for ODTU
Multi-Channel and
multi-level ODTU
Add/Drop multi-
level mappings.
OTN Receive - Set / Set 2
Use the Set 1, Set 2 and Set 3 screens to configure the OTN Receive parameters.
The Set 2 screen Enables and Disables the following OTN alarm reporting parameters:
•
OTU SM TIM Alarm Reporting (OTU SAPI and DAPI - Trace Identifier
Mismatch) - Enabled or Disable Alarm Reporting
•
ODU PM TIM Alarm Reporting (ODU SAPI and DAPI - Trace Identifier
Mismatch) - Enabled or Disable Alarm Reporting
209
tab, you can further multiplex the STM-1 Mapping
option from an AU-4 C-4 Bulk Filled Mapping down to
the lowest Mapping option available
The ODUflex Mapping menu supports 8G Fibre Channel (7
ODU-0 containers) and 4G Fibre Channel (4 ODU-0
containers), as well as PRBS, Null Client and GFP over 1 to
8 ODU-0 containers.
The ODUflex Mapping menu is available when an ODU-2
mapping is configured for ODUflex.
Selects the foreground receive ODU-j Dropped Port #
(Channel) number for overhead/trace analysis and byte
capture, and which 1.25G Tributary Slots are assigned to
each of the ODU-j ports, within the ODTU mapping.
For multi-level ODTU Add/Drop mappings, select the
ODU-j or ODU-j Selected button (located in the LED Quick
Status area) to select the A/D ODU-j level.
The ODU-j Dropped setting is only available for ODTU
Multi-Channel and multi-level ODTU Add/Drop mappings.
For ODTU Multi-Channel mappings, all ODU-j channels
are being monitored for errors and alarms in the Results >
Multi-Chan screen.