VeEX MPA User Manual page 740

MPA_e_manual_D07-00-129P_RevA00
If routing the packets through a network switch, the stream's Source and
Destination
If routing the packets through a network router, the stream's Source and
Destination MAC and
6. Select Save. The stream configuration parameters display in the Stream Profile
table.
Use the horizontal scroll bar at the bottom of the Stream Profile table to view
additional columns.
You can also rearrange the
important to you can be displayed without needing to use the scroll bar.
7. With all of the test streams turned Off, press the Restart button at the bottom of
the screen to set the transmitted and received packet counts to 0.
8. Enable the desired stream(s) to begin generating traffic on the configured test
stream(s).
9. After the desired test time has elapsed, then Disable the stream(s) currently
generating traffic.
This is preferred over pressing the Stop button, because this allows any packets
in transit to be returned and counted, whereas Stop might stop all packet counters
before any packets in transit have been returned.
Use the horizontal scroll bar at the bottom of the Stream Profile table to view
hidden columns.
To use the Order Columns feature :
1. Select the Col button, to display the Rearrange Columns dialog box.
2. In the Rearrange Columns dialog box, select the Columns button to display the
Select Next Column dialog box.
3. In the Select Next Column dialog box, select a button for the associated
description to appear in the top row of the display. The Select Next Column
MAC Addresses should be configured.
IP Addresses
column order
should be configured.
so information that is most
Packet Tab
740