VeEX MPA User Manual page 269

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
2. Choose the Report type(s) to be printed or saved.
The most common report is the Statistics report, which contains a complete list of
error and alarm statistic information as well as other counts that pertain to the test
performed.
Multiple reports can be combined into one file by selecting more than one report type.
The reports listed below are only available for the OTN protocol processor.
Settings
Statistics
Events
Capture
Serv Disrupt Reports Service Disruption statistics.
RTD
269
Reports the Stream Settings for the selected Port.
Reports all Steam Tx/Rx Packet counts, Errors, and Alarms.
Reports a summary of Events, such as alarm and error activity.
Reports the results from an overhead byte capture test
Reports the Round Trip Delay measurements.