Vnc Viewer Configuration - VeEX MPA User Manual

MPA_e_manual_D07-00-129P_RevA00
Advantages of using the VNC viewer to remotely control an MPA system:
•
VNC viewers are supported on multiple OS platforms including; Windows, Mac
OS X, iOS, Android, and Linux, and are available for most portable devices such
as; Laptops, Tablets, and Smartphones.
•
Remote Control operation without the need to install a dedicated Remote Client
application.
•
No interference from Firewall software or other network restrictions.
•
Since the Remote GUI client is displayed in full-screen mode within VNC viewers
that support the option to stretch and resize, the Remote GUI client can
effectively operate at any desirable viewing size.
•
VNC viewer applications such as RealVNC (version 5.1 or newer),TightVNC,
UltraVNC, or whichever VNC viewer application is supported by your PC/device,
can typically be downloaded from the Internet for free.
VNC connection to MPA:
When the MPA is connected to the same network as your VNC equipped PC, or directly
connected to your PC's Ethernet port, you can log into the MPA using the VNC viewer
to remotely control the user interface.
Verify that the MPA's IP Address has been configured, and you can Ping the IP
•
Address.
•
Verify each concurrent VNC connection to the same MPA uses a different VNC
Port # (from 1 to 10). Example: 192.168.0.10:1 to 192.168.0.10:10
•
Refer to

VNC Viewer Configuration

based on the VNC viewer application you are using.
•
VNC viewers only require a login Password. A Username is not required.
•
The default VNC Password for the MPA is Admin1.
•
Refer to Multiple Remote VNC Desktops
connections.
VNC Viewer Configuration
For Optimal Performance, verify that your VNC viewer settings are configured for the following:
•
Picture Quality should be set to the Highest setting available
•
Scaling should be set to Automatic or Window Size
•
Toolbar should be disabled
for the recommended configuration settings,
for multiple remote VNC desktop
VNC Connection
42