VeEX MPA User Manual page 682

MPA_e_manual_D07-00-129P_RevA00
The Packet tab provides the option to Print or Save the following test reports to a file for
access later or for immediate printing; Stream Settings, Stream Test Statistics, the
Events Log, RFC Throughput, RFC Frame Loss, and RFC Combined reports.
Multiple reports can be combined into one file by selecting more than one report type.
The following reports are available from the Packet tab:
Settings
Statistics
Events
RFC Thru Put
RFC Frame Loss
RFC Combined
To save or print test results:
1. Configure and run Fibre Channel Stream transmissions or perform an RFC-2544
test.
2. Select the Report common function button located at the bottom of the screen.
The Report Setup dialog box appears.
3. Select the Destination Printer or File type. The following report Destinations are
available:
Reports the Stream Settings for the selected Port.
Reports all Steam Tx/Rx Packet counts, Errors, and Alarms.
Reports a summary of Events, such as alarm and error activity.
Reports the Throughput test settings and a summary of the test
results for each packet size (passing rate, transmitted and
received packets, minimum/maximum/average latency).
Reports the Frame Loss test settings and a summary of the test
results for each packet size (passing rate, transmitted and
received packets, minimum/maximum/average latency).
Combines the RFC Thru Put, RFC Frame Loss and RFC B2B
Burst reports into one report.
Packet Tab
682