VeEX MPA User Manual page 542

MPA_e_manual_D07-00-129P_RevA00
MPLS S(Bottom)
MPLS TTL
VLAN TPID
VLAN PCP/QOS
VLAN DEI
VLAN VID
MPLS Tagging must be enabled to use this parameter.
Configures the MPLS Bottom of Stack value. This is a 1-bit
setting that should remain set to the default value of 0, for
Ethernet networks.
MPLS Tagging must be enabled to use this parameter.
Assigns a MPLS TTL (Time To Live) value. This is a decimal
setting ranging from 0 to 255.
MPLS Tagging must be enabled to use this parameter.
Configures the VLAN Tag Protocol Identifier. The default value is
0x8100, but the menu lets you select 0x88A8, 0x9100, 0x9200 or
enter a 2-byte User Defined HEX value.
VLAN Tagging must be enabled to use this parameter
Configures the VLAN Priority Code Point/Quality Of Service. This
is the frame's priority level and is a 3-bit field ranging from the
default value of 0 (best effort) to 7 (highest priority).
VLAN Tagging must be enabled to use this parameter.
Configures the VLAN Drop Eligible Indicator. This is a 1-bit
setting that should remain set to the default value of 0, for
Ethernet networks.
VLAN Tagging must be enabled to use this parameter.
Assigns a VLAN ID to the VLAN tag. This identifies to which
VLAN the frame belongs. IDs are entered as a decimal identifier
ranging from 0 to 4095.
VLAN Tagging must be enabled to use this parameter.
Packet Tab
542