VeEX MPA User Manual page 205

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
205
•
GFP: The OTN frame is configured with a GFP
Payload.
•
ITU-T G.709 Sup43 7.3: The OTN processor is
configured for a 10Gbps LAN mapping over OTU-2,
with a GFP-F structure, per ITU-T G.709 Supplement
43 Section 7.3.
•
ODU-Flex: OTU-2 can be mapped for ODU-Flex,
which supports 8G Fibre Channel (7 ODU-0
containers) and 4G Fibre Channel (4 ODU-0
containers), as well as PRBS, Null Client and GFP
over 1 to 8 ODU-0 containers.
•
ODTU Multi-Chan: ODTU Multi-Channel mappings
support simultaneously and independent testing of all
ODU-j containers, for the selected ODTU level.
ODTU Multi-Channel ODU-j containers only support
PRBS or Null Client (All Zeros) payload patterns.
•
ODTU Add/Drop: ODTU Add/Drop mappings support
a single-channel mapping structure comprised of
multiple ODU-j levels.
ODTU Add/Drop mappings differ from ODTU Multi-
Channel mappings in that multi-level ODTU-A/D
Mappings only supports a single-channel ODU-j
container, whose foreground ODU-j channel may be
configured for ODU-Flex, GFP, PRBS Patterns, ITU-T
G.Sup43 7.3, NULL Client, 40G LAN, 10G LAN,
Transcoded 1000 Base-X, SDH/SONET mappings,
STM-4/STS-12 and STM-1/STS-3 mapping options;
depending on the selected ODU-j level.
•
41G LAN: 41G Ethernet mapped into an OTU-3.
•
103G LAN: 103G Ethernet mapped into an OTU-4.
•
10G Fibre Chan SYNC: 10GFibre Channel mapped
into an OTU1f or OTU2f.
•
802.3 10G LAN SYNC: 10G Ethernet mapped into
an OTU1e or OTU2e.
The available mapping options are dependent on the
Interface rate selected, and the licensed-based test options