VeEX MPA User Manual page 533

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
Send Burst
COL button
533
The Send Burst button will generate a single burst of packets
on the selected stream id, for the number of packets specified
by the Burst Size setting, when the selected stream is turned
off.
The default Burst size is 1 frame, however you can edit the
stream's Burst Size setting from the stream's Profile window.
Burst sizes can range from 1 to the maximum number of
packets per second.
The COL button allows the user to rearrange the Stream
Profile Table's columns display.
To use the Rearrange Columns feature:
1. Select the Col button, to display the Rearrange
Columns dialog box.
2. In the Rearrange Columns dialog box, select the
Columns button to display the Select Next Column
dialog box.
3. In the Select Next Column dialog box, select the
button for the associated description to appear as the
first column (from left to right) in table. The Select
Next Column dialog box disappears and your
selection appears in the top row of Column dialog box
display window.
4. Again, in the Rearrange Columns dialog box, select
the Columns button to re-display the Select Next
Column dialog box.
5. In the Select Next Column dialog box, select another
button for the associated description to appear as the
next column (from left to right) in the table. The Select
Next Column dialog box disappears again and this
selection now appears above the previous selection in
the Column dialog box display window. .
6. Repeat Steps 4 and 5 to select the chosen however
many of the remaining entries in the Select Next
Column dialog box you wish to re-order.
7. There are two choices for submitting the selected