VeEX MPA User Manual page 752

MPA_e_manual_D07-00-129P_RevA00
•
Press Hour to adjust the hour setting using 2-digit, 24-hour, military time
format
•
Press Minute to adjust the minutes setting using a 2-digit format
•
Press Second to adjust the seconds setting using a 2-digit format
5. Select Set. The time change appears next to the Unit Time, Date setting.
To Manually set the Date:
If the MPA system is not be connected to an NTP timeserver and not configured
for Automatically set the Time and Date, the system Date and Time can be
configured manually.
However, the Date and Time will automatically revert back to their default values
programed in Linux, whenever the system is rebooted if the Date and Time are
not automatically acquired on boot up.
1. From the System tab, select Unit Time, Date. The Date/Time and Time Zone
menu appears.
2. The Date/Time and Time Zone menu displays the following items:
•
After manually setting the current Time or Date, the word (Enabled) will
appear to the right of Manually Adjust Date/Time.
•
Likewise, the word (Disabled) will appear to the right of Automatically
Adjust Date/Time.
3. Select Manually Adjust Date/Time. The Set the Date/Time window appear.
4. Press the Date button, and change any of the following options.
•
Press Month to adjust the month setting using a 2-digit format
•
Press Day to adjust the day setting using a 2-digit format
•
Press Year to adjust the year setting using a 4-digit format
3. Select Set. The date change appears next to the Unit Time, Date setting.
Misc Screen
752