VeEX MPA User Manual page 424

MPA_e_manual_D07-00-129P_RevA00
Options
Set to 00000000 Configures the K2 byte to 00000000 bit
Default
(10101010)
Illegal
(11111111)
User Defined
K2 Bits 1-4 (Ring Mode)
This function edits the first four bits of the K2 byte. In Ring mode, the first four bits are
the Source Node Identification. (The Source Node ID is set to the Node's own ID.)
The following options are available:
Options
#0
#1
#2
#3
#4
Description
pattern.
Configures the K2 byte to 10101010 bit
pattern.
Configures the K2 byte to 11111111 bit
pattern.
Allows you to configure the bit pattern one
bit at a time using the touch screen keypad.
Description
Protection channel requesting switch action.
The protection channel is supplied with a signal
containing valid Transport Overhead for
carriage of the APS bytes and BIP-8, Bit
pattern 0000.
Channel 1 requests switch action, Bit pattern
0001
Channel 2 requests switch action, Bit pattern
0010
Channel 3 requests switch action, Bit pattern
0011
Channel 4 requests switch action, Bit pattern
0100
SDH Tab
424