•
REF +/- command: adjusts the reference level finely by 0.01 increments with the help of
the
|Up|
and
|Down|
8.3.2 Saving Measurement Results
To save the result, press the
saved with the comment (note) from the previously saved result.
8.4
Using WaveID
8.4.1 FX87 Device and FX-8x OPM Connected from End to End
Set the FX-8x OPM WAVE
setups
1. Set the FX87 in DWDM OLS mode to transmit by pressing LAS ON |F1|, and press
CHANNEL
|Down|
keys and press
2. Set the FX87 in PM1/PM2 (OPM) mode and press LASER
LAS ON
|F1|
or navigate to the desired DWDM channel using the
|Shift/Enter|
FX87 DWDM Tunable Laser Source User's Manual
buttons.
|Shift/Enter|
FX87 connected over fiber under test to FX-8x OPM
|F1|
function to AUTO, and choose from one of two FX87 transmit
|F2|,
and navigate to the desired DWDM channel using the
|Shift/Enter|
to turn on the laser for the current displayed wavelength by the >.... <
to confirm the
selection.
and
|Up|
buttons simultaneously. The result is then
to confirm the
selection.
|Up|
|Up|
|F2|
and choose either
and
|Down|
keys and press
Page 20 of 39
and