VeEX MPA User Manual page 528

MPA_e_manual_D07-00-129P_RevA00
Pause
Preamble
Allows the user to generate Pause frames for a specific
Pause Quanta value.
Valid values are: 1 to 65535
Important: Flow Control must be enabled in order to count
Pause Packets.
Important: Pause is not available when IP Reflection is
enabled.
For more information, see the
Control) into a Stream
Allows the user to modify the interface Port's Preamble and
the Start Frame Delimiter (SFD)
The SFD is designed to break the Preamble pattern with a
default value of #D5, and signals the start of the actual frame.
Important: The Restore Default button in the keypad will
set the Port's Preamble and SFD back to a value of 55-55-
55-55-55-55-55-D5.
Inserting a Pause (Flow
specific task.
Packet Tab
528