VeEX MPA User Manual page 575

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
Current
Results - Alarm Screen
(Specifically for LAN/WAN Ethernet testing on the Packet tab)
The Alarm screen reports the various alarms detected by the receiving equipment.
The following alarm types can be monitored:
Alarm Type
CP Power Loss
Paused
Power Hot
Power Warm
LOS
Link Down
Local Fault
Remote Fault
575
Displays the current error rate using an N.NNe-N format.
Description
The Circuit Pack module experience a power loss fault during
test
The test was manually paused by selecting the
or by a SCPI script command
The received optical power level exceeded the laser's
maximum input limit
The received optical power level is within 3 dBm of laser's
maximum input limit
A Loss Of Signal alarm has occurred
A Loss of Link State alarm occurred
A Local Fault alarm has occurred
A Remote Fault alarm has occurred
Pause button