MPA_e_manual_D07-00-129P_RevA00
By attaching a USB flash drive containing the mpa_ipconfig configuration file to
either the
SCM-210
will automatically change the MPA's IP Address to whatever IP Address is programmed
in the mpa_ipconfig file.
Software Requirements
•
mpa_ipconfig (Editable text file)
This file is included in the USB drive that was shipped with the MPA system, also
it can be provided by contacting
Hardware Requirements
•
Standard USB flash drive (20KB of free space)
or
AM4022 Processor
SCM-210 card (3x USB ports to choose from)
Customer Technical
Configuring the IP Address
(depending on your unit's configuration), this
Support.
22