VeEX MPA User Manual page 672

MPA_e_manual_D07-00-129P_RevA00
Pause
Test/Resume Test
When a Record option is chosen, the results are saved to a
file with one of the following extensions:
•
.stat - Results Report. A statistics report of the
received Errors, Alarms, Pointer Analysis, and Signal
Status functions.
•
.evt - Event Report. A detailed summary of received
Errors, Alarms and Pointer event activities.
The file naming convention is: XX S#-P#-hhmmss.<file
extension> (where XX is the Protocol Processor
name, S# is the Slot#, P# is the Port#, hh is Hours, mm
is Minutes, ss is Seconds).
For example, a file named "SONET S2-P1-155815."
represents a SONET statistics report from Port 1 on
Slot 2 and was recorded at 15:58:15.
To determine how long a test will run, refer to Duration.
After configuring the Duration, you must select
order for the Timed Test to begin.
To learn how to print or view saved files, see the topic
Print or View Saved Files.
To pause a test:
Select Pause Test.
When Pause is selected, the system stops collecting
data, but the Elapsed Time counter continues.
Additionally, when Pause is selected, a red Test
Paused LED appears in the LEDs Quick Status area.
To resume a test:
Select Resume Test.
The Test Paused LED turns white with red text,
indicating that the test was paused earlier.
Events occurring while in Pause mode will not be
Packet Tab
Restart in
672