MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
6. Configure the desired Data Rate, Frame Length, and Payload test pattern.
7. Select the Save All button to save the entered test stream parameters, then
select the Exit button.
8. The Status menu field will display the following
The Fabric Login status will display "Fabric: Not Logged in"
•
The Name Server Login status will display "Named Server: Not Logged in"
•
9. Select the On/Off button labelled 1 to the left of the stream to turn on stream
traffic generation.
10. Fibre Channel verification statistics may now be observed.
Fabric and Name Server login procedure
(Specifically for Fibre Channel SAN testing on the Packet tab)
677