MPA_e_manual_D07-00-129P_RevA00
2. Select Configure from the main menu.
•
Disable (uncheck): Show Toolbars by Default, in the User Interface section.
•
Leave the remaining options as set by default.
3. From the Main Menu, enter the MPA's IP Address in the Remote Host field, followed by
colon (:) and the VNC Port #.
•
Verify the VNC Port # (from 1 to 10) being entered is not being used by another
user.
•
Example:
4. Click on Connect.
5. Enter the MPA's VNC Password and click OK.
•
The default VNC Password for the MPA is Admin1.
Multiple Remote VNC Desktops
In addition to the standard multi-user Windows based Remote GUI client, the VNC
Server on an MPA unit can also support simultaneous VNC Viewer connections,
allowing multiple users to remotely control a single MPA system from any Operating
System.
VNC Connection
46