VeEX MPA User Manual page 338

MPA_e_manual_D07-00-129P_RevA00
Action buttons
State
If 0 is entered, then the 255 bytes immediately preceding the
trigger, as well as the triggered byte value will be captured, but
0 bytes after the trigger will be captured.
Capture - Activates the capture feature, and changes the
State to "Waiting for Trigger".
If the Capture Trigger setting is set to MANUAL, then the
capture will immediately be triggered, otherwise the processor
will wait until the selected Capture Trigger event occurs.
Stop - Deactivates the capture feature, and changes the
State from "Waiting for Trigger" to "Start", and re-enables the
Capture button.
Reset - Clears the previously captured byte values
Displays the current state of the capture feature. Possible
States include:
Start
Waiting for Trigger
Done
SONET Tab
338