MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
HP J1 Trace
LP J2 Trace
TC Trace
SDH Receive - Capture
Use the Capture screen to capture 256 bytes of received overhead bytes, before/after a
triggered event occurs.
Function
455
of the received HP Signal Label, and the V5 byte can be
selected to show the decoded value of the received LP
Signal Label.
Displays the HP J1 trace received on the incoming SDH
signal. This is a read-only function.
Displays the LP J2 trace received on the incoming SDH
signal. This is a read-only function.
The J2 trace only appears when Low Path mapping is
selected.
Displays the TCM trace received on the incoming SDH
signal. This is a read-only function.
Description