VeEX MPA User Manual page 143

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
Physical Lane
Skew (bit)
Skew (ps)
Button description:
•
The lane's Error/Alarm button will appear Grey with no text if that lane
has not received any of the specified Errors or Alarms since the beginning of the
current test.
•
that lane is currently receiving any of the specified Errors or Alarms.
•
that lane previously received any of the specified Errors or Alarms, but is not
currently receiving them.
•
Selecting a lane's Error/Alarm button will show you the number of accumulated
Errors/Alarms that lane has currently received.
MLD Results - Event
The Results - Event function provides a detailed summary of when and how many
errors, alarms, and other specific activity that has occurred and has been recorded by
the unit since the time the test was started
The events appear in a table that lists events, the number of events logged, the start
and stop time of the event, and the duration of the event.
143
being received on any of the Physical
lanes. This only applies to an Unframed
BERT rate. (see button description
below)
Displays the Physical Lane number.
Shows the lane's measured Skew delay
in Bits.
Shows the lane's measured Skew delay
in picoseconds.
The lane's Error/Alarm button will appear Red with Black text if
The lane's Error/Alarm button will appear Grey with Red text if