MPA_e_manual_D07-00-129P_RevA00
Jabber Condition
The following alarm statistics are displayed:
Statistic
Alarm Description
Seconds
Results - Count Screen
(Specifically for LAN/WAN Ethernet testing on the Packet tab)
The Count screen displays Utilization, Packets, VLAN,
by type and count.
To view total transmit and receive utilization statistics, select the Utilization button. The
following statistics appear:
Desc column
Total - TX BW
Total - TX Mbps
Total - TX PPS
A Jabber alarm has occurred, which could be caused by a
device that is handling the electrical signals improperly.
10/100/1000BaseT ports only
Description
Displays the alarm type recognized and recorded by the unit.
Displays the number of seconds the alarm spent in the alarm
condition.
Current / Min / Max / Avg columns
Displays the Current, Min, Max and Avg. Total %BW
Transmitted
Displays the Current, Min, Max and Avg. Total Mbps rate
transmitted
Displays the Current, Min, Max and Avg. Total Packet Per
MPLS
and
Packet Size
Packet Tab
statistics
576