VeEX MPA User Manual page 645

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
EOF
R_CTL
D_ID
CS_CTL
S_ID
645
Selects the End of Frame Delimiter Used. EOF Delimiter
Functions are:
EOFt – EOF Terminate
•
EOFdt – EOF Disconnect-Terminate
•
EOFa – EOF Abort
•
EOFn – EOF Normal
•
EOFni – EOF Normal-Invalid
•
EOFdti – EOF Disconnect-Terminate-Invalid
•
EOFrt – EOF Remove Terminate
•
EOFrti – EOF Remove Terminate-Invalid
•
Routing Control – 1 byte, used for categorizing the frame
function.
The routing portion says if this is a data frame or a link-control
frame (either an ACK or a Link Response), and the information
portion indicates the type of data.
supports raw edit of field values only
Destination Identifier – 3 bytes, address identifier of the FC
frame's destination port.
supports raw edit of field values only
Class Specific Control/Priority - 1 byte, Quality of Service.
supports raw edit of field values only
Source Identifier – 3 bytes, address identifier of the FC frame's
source port.
supports raw edit of field values only