VeEX MPA User Manual page 300

MPA_e_manual_D07-00-129P_RevA00
K2 Bit 5 (Provisioned) (Linear Mode)
This function edits the 5th bit of the K2 byte. In Linear mode. This bit controls the type of
protection switching architecture used.
The following options are available:
Options
1+1
1 : n
K2 Bits 6-8 (Linear Mode)
This function edits the 6th, 7th, and 8th bits of the K2 byte. These bits indicate if a FERF
or FEBE occurs at the line level. The current value displays in the User Setup column of
the APS Commands function.
Options
(000) Unused
(001) Unused
(010) Unused
(100) Unused
(100) Uni-direct
(101) Bi-direct
(110) MS-RDI /
Description
Provisioned for 1+1 mode; Bit 5 = 0
Provisioned for 1:n mode; Bit 5 = 1
Description
Not used, Bit pattern 000
Not used, Bit pattern 001
Not used, Bit pattern 010
Not used, Bit pattern 100
Provisioned for Unidirectional switching, Bit
pattern 10
Provisioned for Bidirectional switching, Bit
pattern 101
Multiplex Section Remote Defect Indicator, Bit
SONET Tab
300