MPA_e_manual_D07-00-129P_RevA00
Depending on the processor card, the following options can be configured from the MLD
tab:
•
All supported Interface rates can be selected, including the Unframed BERT
mapping options.
•
The PCS or Logical, unframed BERT, and PCS BERT virtual lane based settings
can be modified.
•
The PCS or Logical, unframed BERT, and PCS BERT virtual lane based results
can be monitored.
•
All Physical lane settings and results can be tested and monitored from this tab.
•
All Optical lane settings and results can be tested and monitored from this tab.
The following processor cards support following Interface rates for the specified laser
module types.
MPM-400G
Interface (Rate)
Ethernet
400G RS-FEC Ethernet (425G)
Unframed
Unframed BERT (425G)
MPM-
100AR
Ethernet
Interface (Rate)
100G Ethernet (103.125G)
100G RS-FEC Ethernet
(103.125G)
Laser Type
CFP8
CFP8
Port #
Laser Type
Port 1 only
QSFP28
Port 1 only
QSFP28
MLD Tab
112