Changing The Tab Name For Protocol Processors; Restoring Default Tab Names For The Go To Label - VeEX MPA User Manual

MPA_e_manual_D07-00-129P_RevA00
•
EMail Alert
Email Alerts based on user specified Error/Alarm occurrences.

Changing the Tab Name for Protocol Processors

1. From the System tab, select User Preference.
2. Under Label Preferences, select Local or Global.
Local – Only changes the tab label for your session. Other users will not
•
see the tab name that you enter.
Global – Changes the tab label on the unit so that all users see the same
•
tab name that you enter.
3. Select a tab name from the Assigned Name column of the list box.
4. Under PP Label Information, enter a name in the Assigned Name text field.
(When using the touch screen, select
5. Select Update List Entry, to add the name to the User Defined Name column of
the list box.
6. Repeat steps 3 through 5 to continue adding user-defined names, as desired.
7. Select Save All List Entries.
•
User defined names instantly replaces the default tab names
•
User defined names also appear in the PP Name/Go To area of the screen,
when the tab is selected
•
User defined names also appear in the Go To menu, located in the top-left corner
of the touch screen
•
User defined names also appear in the Subject line of all
to the specific protocol processor
To restore the default tab names, select

Restoring Default Tab Names for the Go To Label

1. From the System tab, select User Preferences.
2. Under Label Preferences, select Default.
3. Select Save All List Entries. The default tab names are restored.
Notification: Allows the unit to be configured for sending automatic
User Preference Screen
to open a keypad.)
Email Alerts
Restoring Default Tab Names
pertaining
780