Screens And Function Descriptions - VeEX MPA User Manual

MPA_e_manual_D07-00-129P_RevA00
The test options available under the SDH (Synchronous Digital Hierarchy) protocol
processor tabs can vary from one card type to another, depending on the test options
supported and actively licensed.
This section of the help file will list all Interface rates and test options currently available
for each card type.
•
The SDH tab on MPM-100G and MPM-100AR modules support STM-256
(39.81G) via pluggable QSFP+ laser modules.
•
The two SDH tabs on MPM-10G modules independently support testing of STM-
64 (9953.28M), STM-16 (2488.32M), STM-4 (622.08M), STM-1 (155.52M) and
STM-0 (51.84M) Interface rates via pluggable SFP and SFP+ laser modules.
All Interface rates supported by the card type that are actively licensed can be
selected from the Interface menu, regardless if the inserted laser module supports the
selected rate or not. The user should verify that the inserted laser module supports the
desired Interface rate prior to selecting it.
The following SDH tab related topics are discussed in this section of the online help
system:
•
SDH Screen and Function Descriptions
•
SDH Specific Tasks
You may also navigate through the topics by using the Contents tab and window that
appear on the left side of the screen.

Screens and Function Descriptions

SDH Tab - Screen Functions and Descriptions Overview
The following function screens are available through the SDH protocol processor tab.
•
Transmit
•
Receive
•
Results
•
Test
•
Perf Monitor
SDH Tab
392