Software Upgrade - VeEX MPA User Manual

MPA_e_manual_D07-00-129P_RevA00
Please use the Contents tab and window (left side of the screen) to select, open, and
view the information in this section.
•

Software Upgrade

•
Timed Licenses
•
MPA Shutdown Procedure
•
Fiber Optic Cleaning Procedure
Software Upgrade
The following procedure is for upgrading an MPA system which already contains
Feature Set 7.5.35 or later, to a newer Feature Set version.
Note: If the current software version on your system is less than Feature Set 7.5.35,
then contact Customer Technical Support
versions.
See the System Tab's
number.
Software Upgrade Requirements
Verify you can Ping the MPA processor's current IP Address
•
See instructions on
o
•
PC with Windows XP, or newer Windows operating system, and web-browsing
software (e.g., Internet Explorer, Chrome, Firefox, etc.)
•
Software release tca.X.Y.ZZ.tgz (where X.Y.ZZ is the actual software version. If
the new Feature Set version is 8.1.89, the software upgrade file will be named
tca.8.1.89.tgz)
o The latest tca.X.Y.ZZ.tgz release file can be downloaded from
www.veexinc.com, or by contacting
o Do not extract the contents from this compressed file.
Software Upgrade Procedure (Current Feature Set ≥ 8.0.51)
for assistance with upgrading older software
About This Product screen for the MPA's current Feature Set
Configuring the IP Address (if needed)
Customer Technical Support
Common Tasks
66