VeEX MPA User Manual page 598

MPA_e_manual_D07-00-129P_RevA00
•
RX: Displays the received optical power in dBm. This status indicator will flash
when one or more received Optical Lanes' power level exceeds the laser
module's Power Warm or Power Hot thresholds.
For MPM cards that have an MLD tab this is an aggregate broadband power
value, based on the combined power levels from all of the laser module's received
Optical Lanes. See the
power levels.
•
E/A: Indicates the current
status indicator.
•
Test Paused: This LED will turn Red if the
Any errors or alarms received while the test is paused will not be recorded in any
of the Results statistics.
•
All Tests: Provides a shortcut to the
System tab) which shows a general status summary of all circuit packs installed
in the unit.
Quick Status LEDs Color Description
Typically a Red LED indicates a problem, whereas a
error-free operation.
•
If an LED if
Alarm condition has not occurred at any time during the current test.
•
If an LED if
condition was active at some point during the current test's history.
•
If an LED and the LED's Text are both Red, then that Error or Alarm condition is
currently active.
Quick Status Area LED's that are underlined are "Summary Status" LEDs and can
be selected to display a summary pop-up window to show the individual LEDs ,and
sometimes error/alarm statistics, related to that status LED.
The following status indicators and LEDs are displayed in the LED Quick Status Area
and the Large LED
Indicator, LED or
Control
LOS
MLD Receive - SIG
Error / Alarm
White or Green and the LED's Text is White, then that Error or
White or Green but the LED's Text is Red, then that Error or Alarm
Results screen.
Description
Loss of Signal alarm status LED. When red, indicates that a
screen for individual Optical Lane
configured for transmission. This is a
Pause Test button has been selected.
All Test Status screen (located under the
Green or White
Packet Tab
LED indicates
598