VeEX MPA User Manual page 185

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
Payload Pattern
Line Frequency
Offset
185
a single-channel mapping structure comprised of
multiple ODU-j levels.
ODTU Add/Drop mappings differ from ODTU Multi-
Channel mappings in that multi-level ODTU-A/D
Mappings only supports a single-channel ODU-j
container, whose foreground ODU-j channel may be
configured for ODU-Flex, GFP, PRBS Patterns, ITU-T
G.Sup43 7.3, NULL Client, 40G LAN, 10G LAN,
Transcoded 1000 Base-X, SDH/SONET mappings,
STM-4/STS-12 and STM-1/STS-3 mapping options;
depending on the selected ODU-j level.
•
41G LAN: 41G Ethernet mapped into an OTU-3.
•
103G LAN: 103G Ethernet mapped into an OTU-4.
•
10G Fibre Chan SYNC: 10GFibre Channel mapped
into an OTU1f or OTU2f.
•
802.3 10G LAN SYNC: 10G Ethernet mapped into
an OTU1e or OTU2e.
The available mapping options are dependent on the
Interface rate selected, and the licensed-based test options
currently enabled.
Selects a test pattern to insert into the payload of an OTN
signal, when the Mapping is set to PRBS or Unframed
BERT.
Select one of the following patterns:
PRBS 9, PRBS 9 Inv,
PRBS 15 Inv, PRBS 20,
23 Inv, PRBS 31, PRBS 31
value) pattern.
The User Defined Payload Pattern is unsupported when
Unframed BERT mode is selected.
Adjusts the offset of the signal frequency of the transmitted
signal, in parts per million (ppm).
The Line Frequency Offset can be set as a Static value, with
a frequency offset value ranging from -300.0 to 300.0, in
increments of 0.1 PPM. A value of 0 (zero) equals Off.
PRBS 11, PRBS 11 Inv,
PRBS 20 Inv, PRBS
Inv, or a User Defined
PRBS 15,
23, PRBS
(32-bit