VeEX MPA User Manual page 730

MPA_e_manual_D07-00-129P_RevA00
(Specifically for GFP Mappings)
The Results - Event function provides a detailed summary of when and how many
errors, alarms, and other specific activity that has occurred and has been recorded by
the unit since the time the test was started
The events appear in a table that lists events, the number of events logged, the start
and stop time of the event, and the duration of the event.
Select the Descending/Ascending button to toggle between the order you wish to view
the results.
Select Pause to temporarily halt the display of results, and press Resume to continue
displaying results in real-time.
For more information, see the
Results - Large LEDs Screen
(Specifically for GFP Mappings)
This button displays the LED Error and Alarm Indicators in a large, easy to read format
that covers the entire screen area. This is especially useful for viewing any errors or
alarms from a long distance, such as across the room from a test bay.
The following describes the LED colors:
If the LED color is ...
Green with black text
Red with black text
White with red text
White with black text
For a list of available LEDs for GFP, see
Test
Test Screens and Functions
(Specifically for GFP testing on the Packet tab)
Use the Event Log section.
Then this indicates ...
The specific function is active and OK.
An error or alarm event is in progress.
This function experienced an error or
alarm event. This event is cleared by
selecting Restart.
No activity from this specific function.
GFP LEDs.
Packet Tab
730