VeEX MPA User Manual page 390

MPA_e_manual_D07-00-129P_RevA00
Serv Disrupt
RTD
Module Info
3. Select the Destination Printer or File type. The following report Destinations are
available:
Printer
Text File
Delimited
PDF Printer
PDF File
4. You can add a User Comment, that will appear at the beginning of the report.
This is useful if you want to include specific note about the test in the report.
Click the Input button to enter any User Comments that you wish to appear in
the printed or saved report file, using the Key board screen that appears.
Press the Clear button to clear the User Comments.
Reports Service Disruption statistics.
Reports the Round Trip Delay measurements.
Reports the SFP Module Information.
Only supported on the MPM-10G card, see the MLD tab for other
card types.
** Module Not Present ** is shown when laser module is not
inserted.
The selected report is sent to your PC's default printer.
The selected report is saved as an ASCII text file, with a .txt file
extension.
The selected Settings or Statistics report is save as a text file, using
Comma Delimited (CSV) file format, with a .csv file extension.
The selected report is sent to your PC's default printer. The format of
the report is similar to the PDF file which allows a User Image file
(such as your company's logo) to be printed at the top of the report.
The selected report is saved as a PDF file, and this format allows a
User Image file (such as your company's logo) to be saved at the top
of the report file, with a .pdf file extension.
SONET Tab
390