Ethernet (Lan And Wan) - Screens And Function Descriptions - VeEX MPA User Manual

MPA_e_manual_D07-00-129P_RevA00
(formerly known as Y.1564sam) Ethernet service testing, and Service Disruption
testing.
The following Packet tab related topics are discussed in this section:
•
LAN/WAN Ethernet - Screens Functions and Descriptions
•
LAN/WAN Ethernet - Specific Tasks Overview
•
Fibre Channel - Screen Functions and Descriptions
•
Fibre Channel - Specific Tasks Overview
•
Generic Frame Protocol (GFP) - Screen Functions and Descriptions
•
Generic Frame Protocol (GFP) - Specific Tasks Overview

Ethernet (LAN and WAN) - Screens and Function Descriptions

Ethernet - Screen Functions and Descriptions Overview
(Specifically for LAN/WAN Ethernet testing on the Packet tab)
This section describes the various screens and functions that control the configuration
and operation of the 802.3 LAN/WAN modes on the Packet tab:
•
Config
•
Perf Tests
•
Results
•
Test
•
LED Quick Status Area
•
Common Function Buttons
•
Lock/Unlock Icon
Config
Config Screens and Functions
(Specifically for LAN/WAN Ethernet testing on the Packet tab)
The Config screen contains the following functions:
•
Set (Configuration Settings)
•
Strms Pg 1 & Strms Pg 2
•
Traffic Stream Profile
•
Error Alarm
(RFC-2544 and Y.1564)
Packet Tab
520