VeEX MPA User Manual page 681

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
If the "Continuous" duration is used, the test will continue to operate until the
Stop button is pressed.
5. Restart the port that will be used for the timed test using the Restart button at
the bottom of the screen.
6. When the time duration of the test is reached, the streams will automatically stop
counting received packets and the Pass/Fail acceptance results are displayed under
the Results > Strm Rslt tab.
User-Defined Acceptance Criteria:
•
Accept Bit Errors - A user-specified threshold value for determining the
acceptable bit error rate for a timed test.
•
Accept Loss Rate - A user-specified threshold value for determining the
acceptable Packet Loss rate for a timed test.
Saving and Printing Statistics and Port Settings
(Specifically for Fibre Channel SAN testing on the Packet tab)
681