VeEX MPA User Manual page 693

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
All
The parameters for each test stream are displayed in the Stream Profile Table as
individual rows, with a horizontal scroll bar at the bottom that can be used to see all of
the columns in the table.
Selecting a Stream (row) from the profile table opens the
box from which the stream parameters are configured.
These are the columns displayed in the Stream Profile Table, in order by the default
arrangement:
Column
TX Status
Traffic
MAC Dest
Length
IP Mode
Payload
VLAN Levels
MPLS Levels
693
Selecting All with Enable/Disable all 32 test streams
simultaneously.
If one or more streams are currently enabled, then All
disables all enabled streams. If no streams are currently
enabled, then All enables all test streams on both Pg1 and
Pg2.
If the total configured bandwidth for all streams enabled
exceeds 100%, the processor will evenly scale back the
actual rates generated to achieve a maximum bandwidth of
exactly 100%.
Description
Indicates whether streams 1-32 are being transmitted (On) or not
being transmitted (Off)
Displays the configured transmit Rates (in %BW) for each
stream.
Destination MAC address
Frame Length
IPv4 or IPv6
Payload Pattern selected
The number of stacked VLAN tags enables (1 through 4, or N/A
for none)
The number of stacked MPLS tags enables (1 through 4, or N/A
for none)
Traffic Stream Profile dialog