Restoring A Settings Configuration Or Factory Defaults - VeEX MPA User Manual

MPA_e_manual_D07-00-129P_RevA00

Restoring a Settings Configuration or Factory Defaults

This function allows you to perform the following actions:
•
Change the Protocol
is selected, the processor's protocol mode is changed (for example, from SONET
to SDH).
•
Restore Settings to Factory
settings. If this option is selected, the processor's default settings are
immediately restored for the selected protocol mode.
•
Restore Settings from Saved
protocol processor's Receive or Transmit settings.
Change the Protocol Mode:
1. Select Test Setup from the Common Function Buttons.
2. Select the Set Protocol Mode button.
3. The following menu options appear:
Protocol Mode
SONET
Protocol Mode
SDH
4. Select the desired protocol mode. The protocol tabs and settings will be updated
to reflect the selected mode, but this does not revert the settings back to their
factory assigned default values.
Restore settings to Factory Defaults:
1. Select Test Setup from the
2. Select the Factory Defaults button.
3. The following menu options appear:
Mode: Changes the unit's Protocol settings. If this option
Defaults: Restores the unit's factory set default
File: Recalls any saved configurations for a
These options appear if your unit contains one or more
SONET/SDH board, but no PDH board
Common Function
Common Function Buttons
Buttons.
60