VeEX MPA User Manual page 27

MPA_e_manual_D07-00-129P_RevA00
Getting Started
4. Enter the new IP Address, Subnet Address, and Router/Gateway Address to
the appropriate settings for your network.
IP addresses 192.168.138.0 through 192.168.138.255 are reserved and
should not be used. A serious system conflict can occur if an IP address in
this range is assigned to the processor.
If you use an IP address in the range of 192.168.x.y (where x is not 138), then
you must set the Subnet Address to 255.255.255.0.
6. The DNS Addresses should only be modified if specific DNS Addresses need to
be entered for your network, otherwise the default DNS Addresses do not need
to be changed.
a. By default, the DNS Address 1 (Primary DNS) is configured for 8.8.8.8,
and the DNS Address 2 (Secondary DNS) is configured for 8.8.4.4. These
are public DNS addresses established by Google, and only need to be
modified if being replacing with a network-specific addresses.
7. Reboot the unit using the Reboot button for the changes to take effect.
8. The current Remote GUI session will close.
9. Allow 4 to 5 minutes for the system to reboot, and for all of the internal software
applications to finish loading before connecting to the new IP Address.
27