VeEX MPA User Manual page 295

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
This function configures the bit pattern of the K1 byte using either predefined or user
defined settings by individually setting the eight bits of the K1 byte using the touch
screen keypad.
The following options are available:
Options
Set to 00000000 Configures the K1 byte to 00000000 bit pattern.
Default
(10101010)
Illegal
(11111111)
User Defined
K1 Bits 1-4 (Linear Mode)
This function edits the first four bits of the K1 byte. The options for this function are
predefined and use mnemonics to identify bit patterns.
The following options are available:
Options
(0000) NR
(0001) Non Rev Do not revert, Bit pattern 0001
(0010) RR
(0011) Unused
(0100) EXER
(0101) Unused
295
Description
Configures the K1 byte to 10101010 bit pattern.
Configures the K1 byte to 11111111 bit pattern.
Allows you to configure the bit pattern one bit
at a time using the touch screen keypad.
Description
No Request, Bit pattern 0000
Reverse Request (Ring), Bit pattern 0010
Not Used, Bit pattern 0011
Exerciser (Ring), Bit pattern 0100
Not used, Bit pattern (0101)