VeEX MPA User Manual page 138

MPA_e_manual_D07-00-129P_RevA00
Frequency Wide (for all Physical Lanes)
LOS (Loss of Signal) (for all Optical Lanes)
Power Hot (for all Optical Lanes)
Power Warm (for all Optical Lanes)
Power Low (for all Optical Lanes)
* This alarm is only available when testing an RS-FEC Ethernet rate
•
Errors - The system can monitor and report errors on the incoming signal. The
Errors function displays a detailed analysis of the incoming errors with the
following parameters; Error count using an 11-digit format, Average error rate
using an N.NNe-N format, Current error rate using an N.NNe-N format. *
The following Errors may or may not be displayed, depending on the error types
supported by the configure Interface:
Error Type
FEC Correctable BIT
Error
FEC Correctable
Sym Error
FEC Uncorrectable
Error
FEC Chan AB
Uncorr
FEC Chan AB Corr
CW
FEC Chan AB Corr
Sym
FEC Chan AB Corr
Bit
FEC Chan AB Corr
Description
FEC Correctable Bit Errors
FEC Correctable Symbol Errors
FEC Correctable Bit Errors
FEC Uncorrectable errors on
Channels A & B
FEC Correctable Code Word
errors on Channels A & B
FEC Correctable Symbol errors on
Channels A & B
FEC Correctable Bit errors on
Channels A & B
FEC Correctable Ones errors on
MLD Tab
138