MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
SDH Receive - SIG
Displays the following measurements of the incoming SDH signal:
•
Frequency in Hz
•
Line Frequency Offset Received in Hz and
•
Optical Power source in dBm (this is an aggregate power level when the laser
module has multiple Optical lanes)
The per-lane optical power levels are displayed on the
screen.
•
AU Pointer Frequency Offset in
•
TU Pointer Frequency Offset in
Only appears when a Low Path mapping is selected.
Results
SDH Results Screens and Functions
All monitored activity that the system receives is reported to the Results screen for
viewing and analyzing. The Results screen provides information used for analyzing the
incoming signal, pattern, errors, and alarms.
459
Hexadecimal format.
The ASCII column displays each captured frame's byte value
in ASCII format. (A hex value o 0, will be displayed as blank)
PPM
PPM
PPM
MLD Receive - SIG