Setting The Alarm Beeper Status - VeEX MPA User Manual

MPA_e_manual_D07-00-129P_RevA00
GUI System Tab
To change tab names, select

Setting the Alarm Beeper Status

This function associates a WAV file sound with an alarm event. When using the unit's
touch screen, a total of 10 sounds are available. When using the remote GUI, up to a
total of 16 sounds can be used. This includes customized WAV files that can be added
by copying the new file to the Remote Control's installation directory on your PC.
To assign an audible notification to an alarm:
1. From the System tab, select User Preference.
2. Select Alarm Beeper Status.
3. Select On or Maintenance. The Alarm Beep Definition dialog box appears.
4. Select an alarm type to display the Select Alarms Sound dialog box.
5. Select a sound. The sound selection uses the WAV file's name. For example,
chord.wav appears as CHORD.
6. If desired, select Test to hear the sound.
7. Select Apply.
To turn off all alarm sounds:
1. Select Alarm Beeper Status.
2. Select Off.
To add new WAV files to the Remote Client on your PC:
1. Make sure that your Remote Client application is closed.
2. Place a copy of the WAV file into the Compat folder that you are running the
Remote Client from.
To locate the Compat folder:
a.
directory is C:\Program Files\DLI\RemoteClient.
b.
The folder name represents the Feature Set operating on the unit. For
example, the Compat folder for Feature Set 7.7.9 appears in the
RemoteClient directory as Compat700070009.
781
Changing a Tab Name for the Go To
Open the RemoteClient directory. For example, the default
Locate the Compat folder from which the Remote Client is running.
Label.