VeEX MPA User Manual page 166

MPA_e_manual_D07-00-129P_RevA00
Module Control Pins
QSFP28 Module Control Pins can be changed when the Interface is set to None.
SFP+ and SFP8 Module Control Pins are read only.
Control Pin Description
TX_DISABLE Toggles the logical state of the TX_DIS pin state.
RS0 Toggles the logical state of the Rate Select 0 bit.
RS1 Toggles the logical state of the Rate Select 1 bit.
TX_FAULT Reports the state of the TX_FAULT signal.
MOD_ABS Reports the presence of an inserted CFP module to the Host.
RX_LOS Reports if the CFP is receiving LOS on any Optical Lane
I2C Access
MLD Tab
166