VeEX MPA User Manual page 228

MPA_e_manual_D07-00-129P_RevA00
•
TX: Displays the transmit interface configuration, such as rate, wavelength,
framing, and/or duplex depending on the specific protocol processor
If a non-OTN interface is selected from one of the other protocol tabs, then "Not
Assigned" will be displayed.
If a laser module is not inserted then "No Laser" will be displayed.
•
RX: Displays the received optical power in dBm. This status indicator will flash
when one or more received Optical Lanes' power level exceeds the laser
module's Power Warm or Power Hot thresholds.
For MPM cards that have an MLD tab this is an aggregate broadband power
value, based on the combined power levels from all of the laser module's received
Optical Lanes. See the
power levels.
•
E/A: Indicates the current
signal. This is a status indicator.
•
Test Paused: This LED will turn Red if the
Any errors or alarms received while the test is paused will not be recorded in any
of the Results statistics.
•
CLK: Indicates the value of the Transmit Clock Reference function. This is a
status indicator.
•
CLK:INT displays when configured for Internal clocking.
•
CLK:REC displays when configured for Recovered clocking.
•
All Tests: Provides a shortcut to the
System tab) which shows a general status summary of all circuit packs installed
in the unit.
•
OTN LEDs
•
TCM Summary LEDs
Quick Status LEDs Color Description
Typically a Red LED indicates a problem, whereas a
error-free operation.
MLD Receive - SIG screen for individual Optical Lane
Error / Alarm configured for transmission in the OTN
Pause Test
All Test Status
button has been selected.
screen (located under the
Green or White LED indicates
OTN Tab
228