VeEX MPA User Manual page 641

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
Name Server Login
Status
Col (Columns)
R_T_TOV
Stream Profile
Table
Count Statistics
Table
641
Attempts a name server Login
This is disabled when the test stream is On.
Link: – displays the current Link status
Fabric: - displays the current Fabric status
Name Server: - displays the current status
Rearrange order of columns displayed in the Stream Profile
Table.
See below for more information on the
Table.
Sets the R_T_TOV timeout setting. The default value is
100ms, and supports a range of 0.01ms to 655.35ms,
specified in units of 10us.
This is the timeout value used by the receiver logic to detect
loss of synchronization. When the receiver goes into the
Loss of Synchronization state for more than the R_T_TOV
timeout value, then a link failure is detected.
The Stream Profile Table contains one Fibre Channel stream
that can be configured. Selecting the stream from the profile
table opens the Traffic Stream Profile dialog box from which
the stream parameters are configured.
Use the horizontal scroll bar at the bottom of the table to view
hidden columns for the stream settings.
See below for more information on the
Table.
The Count Statistics Table displays the following information
for both transmitted (TX) and received (RX) frames:
•
TX/RX - Defines which row of statistics is designated
for Transmit counts (TX) and which row is designated
for Receive counts (RX)
•
Frames - Displays the total number of frames sent or
received since the test was started.
•
Frms/sec - Displays the current rate of frames sent or
received in frames per second.
•
Bytes - Displays the total number of bytes sent or
Stream Profile
Stream Profile