Sdh Specific Tasks - VeEX MPA User Manual

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
This section allows users to Read and/or Write to specific 2-wire (I2C) reference
addresses.
Select the Address button to open a keypad that can used to enter the decimal
reference address.
Select the + or – buttons to increment or decrement the hexadecimal reference
address.
Select the Read button to read the selected reference address current value, which
displays as a four-digit hexadecimal number next to the Data button.
Select the Data button to open a keypad that can used to enter a user-defined
hexadecimal value to be written to the reference address.
Select the Page 0 to Page 4 checkbox to access the specified address for the desired
Page.
Select the Write button to send the user-defined Data value to the specified reference
address.
The user-defined hexadecimal numbers can range from 0 to FF (a leading 0 does not
need to be entered).

SDH Specific Tasks

SDH Specific Tasks Overview
This section includes tasks that are specific to the SDH protocol processor.
For a description of specific screens and their functionality, refer to
Functions and Descriptions
Please use the Contents tab and window (left side of the screen) to select, open, and
view Specific Tasks for this protocol processor.
•
10G WAN testing over STM-64
•
Configuring APS (K1 and K2) Commands
•
Decoding APS (K1 and K2) Values
501
Overview.
SDH - Screen