VeEX MPA User Manual page 71

MPA_e_manual_D07-00-129P_RevA00
Getting Started
AC P/S in the Unlocked position
6. For the AC Power Supply, toggle the On/Off switch to the Off position before
unplugging the power cable.
a. The AC Power Supply supports a standard IEC 320-C14 connector, as
well as a Self-Locking connector to prevent the power cord from
accidentally being unplugged.
b. Push in on the button on the bottom side of the connector to unplug the
Self-Locking power cable.
Note: The Unlock/Extraction handles on the remaining MPM test modules do not need
to be pulled out prior to shutting the system off, and they will automatically shut down
when the MCH or SCM-210 card is shutdown.
Warning! Do not power off the unit, or remove any cards or power cables while the
SCM-210 card (or AM4022 Processor and MCH card) are still active, nor while any of
their blue hot-swap LED's are still flashing.
71
DC P/S in the Unlocked position