VeEX MPA User Manual page 657

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
6. To Save a screen shot of any of the above graphs to a Screen(#).bmp file,
select the
Results
Results - Screens and Functions
(Specifically for Fibre Channel SAN testing on the Packet tab)
Test activity and event history can be viewed using the various functions of the Results
screen.
The Results screen contains the following functions:
•
Scan - Displays a list of errors and alarms along with their count and duration.
•
ERR - Displays a list of errors along with their count, errored seconds, average
and current rates.
•
ALARM - Displays a list of alarms along with the number of seconds spent in the
alarm condition.
•
Count - Displays Frame count statistics.
•
Strm Rslt - Displays the Stream specific statistics.
•
Event - Displays a summary of error alarm activity.
•
Large LEDs
•
Graph - Displays a graphical representation of the error and alarm history.
Results - Scan
(Specifically for Fibre Channel SAN testing on the Packet tab)
This function displays a list of received errors and alarms.
For Alarms, the duration is reported as a count in seconds.
For Errors, an error count is reported.
657
button from the common functions row, and then press the
button
- Displays easy to read LEDs of error alarm activity.