Set The Unit's Date, Time, Time Zone, And Daylight Saving Time Option - VeEX MPA User Manual

MPA_e_manual_D07-00-129P_RevA00
GUI System Tab
•
If you have established a Remote GUI connection from your PC to the
MPA unit, then the new license key can easily be copied from your PC
and pasted into the keyboard entry field.
5. Select Enter when done.
6. Reboot the unit for the new functions to take effect.

Set the Unit's Date, Time, Time Zone, and Daylight Saving Time option

The current time and date settings are displayed to the right of the Unit Time, Date
setting. The Time's format is displayed in 24-hour (military time format) as HH/MM/SS.
The Date's format is displayed as MM/DD/YYYY.
To Manually set the Time:
If the MPA system is not be connected to an NTP timeserver and not configured
for Automatically set the Time and Date, the system Date and Time can be
configured manually.
However, the Date and Time will automatically revert back to their default values
programed in Linux, whenever the system is rebooted if the Date and Time are
not automatically acquired on boot up.
1. From the System tab, select Unit Time, Date. The Date/Time and Time Zone
menu appears.
2. The Date/Time and Time Zone menu displays the following items:
•
After manually setting the current Time or Date, the word (Enabled) will
appear to the right of Manually Adjust Date/Time.
•
Likewise, the word (Disabled) will appear to the right of Automatically
Adjust Date/Time.
3. Select Manually Adjust Date/Time. The Set the Date/Time window appear.
4. Press the Time button, and change any of the following options.
751