MPA_e_manual_D07-00-129P_RevA00
4. Click on Connect.
5. If an Unencrypted Connection message appears select (check) Don't warn me about
this again and click Continue.
6. Enter the MPA's VNC Password and click OK.
•
The default VNC Password for the MPA is Admin1.
Real VNC: version 6.1.x
1. Select New Connection from the File menu.
2. From the Options tab, select the following options:
•
Set the Picture Quality to High
•
Disable (uncheck): View-only
•
Set the Scaling to Automatic
•
Enable (check): Preserve Aspect Ratio
•
Enable (check): Pass Media Keys ...
•
Enable (check): Pass Special Keys ...
3.
From the Expert tab, scroll down and highlight the Enable Toolbar parameter.
•
Set the Value to False.
4. Enter the MPA's IP Address in to the VNC Server field on the General tab, followed by
colon (:) and the VNC Port #.
VNC Connection
44