VeEX MPA User Manual page 490

MPA_e_manual_D07-00-129P_RevA00
Action After
Duration
•
1 Hour - Test runs for 1 hour.
•
2 Hours - Test runs for 2 hours.
•
24 Hours - Test runs for 24 hours.
•
72 Hours - Test runs for 72 hours.
•
1 Week - Test runs for 1 week.
•
2 Weeks - Test runs for 2 weeks.
•
User Defined - Allows a specific test duration to be
entered using a touch screen keypad. The minimum
duration is 1 minute. The maximum duration is 99
days, 23 hours, and 59 minutes.
After configuring the Duration, you must select Restart in
order for the Timed Test to begin.
Action after Duration defines what activities occur at the
conclusion of a timed test. It allows several different options,
including printing results to a printer or recording them to a
file; repeating a test or just processing one test. Test results
appear in a columned report format; however, there is one
option available to record the statistics using a delimiter.
The table below describes the Action after Duration options.
Action after Duration
Options
None
Print Current Statistics
Record Current Statistics
Description
No action occurs at the end
of the test duration.
At the end of a timed test a
statistics report of the
received Errors, Alarms,
Pointer Analysis, and Signal
Status are printed to the
configured printer.
The test does not repeat.
At the end of a timed test a
statistics report of the
received Errors, Alarms,
Pointer Analysis, and Signal
Status are saved to a text file
SDH Tab
490