VeEX MPA User Manual page 29

MPA_e_manual_D07-00-129P_RevA00
Getting Started
•
For Ethernet, a standard 10/100/1000BaseT RJ-45 Ethernet cable, connected
to a network or directly to a PC
•
For USB, a USB 2.0 Micro-B cable (provided with system)
(Two USB cables are shipped with the new systems; a USB 2.0 Mini-A connector
type for use with the AMC Processor, and a USB 2.0 Micro-B connector type for
use with the MCH)
Option 1: Establish a connection to the MCH via Ethernet (Telnet):
1. To communicate with the MCH via Telnet, the MCH's GbE current IP Address
must be known and responsive to Ping requests.
The MCH's default IP Address is 192.168.0.11 (for units built after of May of
•
2014)
If the MCH's current IP Address is unknown or does not respond to Ping
•
requests, then precede to the USB instructions
2. Launch the PuTTY utility, and select the Telnet Connection type (Port #23).
3. Enter the MCH's current IP Address into the Host Name text box and click
Open.
29